The Top 5 Best Portable Pool Cue Holders
Leaving your pool cue standing against a wall or table and then accidentally knocking it over can be really frustrating and can cost a lot to fix. To avoid this, it’s smart to use something called a cue holder.
A cue holder is a useful tool that you can attach to a flat surface like a table. It keeps your pool cue standing upright when you’re not playing. This is especially helpful when you’re at a pool hall or somewhere without a special stand for your cue. So, using a cue holder can save you from these troubles.
Portable pool cue holders are not very expensive. That’s why they’re good to get if you like playing pool a lot. They’re also important for anyone who wants to protect their pool cues from getting accidentally damaged.
If you’re looking to buy a portable pool cue holder, this article can assist you. Here are the top 5 ones available right now. Any of these holders will do a good job of keeping your pool cues safe when you’re not playing!
#1. Predator FCH (Folding cue Holder)
At the top of our list for the best portable pool cue holders is the Predator FCH. Predator is known for making cool stuff like pool cues, and their folding cue holder is also really popular.
The holder is made of strong brushed aluminum, which is light and looks nice. The part that holds the cues is made of rubber, so your cues won’t get scratched. You can fold it up when you’re not using it, and it’s simple to use. Plus, it comes with a case to carry it in.
Some people say this is the best cue holder ever because it’s good quality and holds the pool cues really well.
- The frame is made of strong brushed aluminum.
- It can be folded up for easy storage.
- The cue rests are soft to touch.
- The case it comes with is molded and has a zipper.
- There’s a holder for 4 cues.
- The aluminum frame has a brushed finish.
- The design allows it to be folded away when not in use.
- The holders for the cues are soft to the touch.
- It includes a carry case for transport.
- Your cues won’t get scratched.
- It’s simple to use.
- It fits inside a cue case.
The Predator FCH is ranked as the top choice for a clear reason. It’s designed to be small and easy to carry, so you can put it in your case or even your coat pocket. The only drawback is its price, which is higher than other cue holders on the list. Despite this, most players find it worth the cost. You can find the Predator FCH available for purchase on Amazon.
#2. CROWN ME Weighted 3-Cue Pool Cue Holder
This cue holder is sturdy and can hold a lot of cues on the edge of a table. It might be hard to attach it to the table if the edge is thick. One issue with it is that it’s a little too wide to fit in the pockets on the side of cue cases that hold two cues. I fixed this problem by using a bench sander to remove about 1/4 inch from each side until I reached the steel part. Now it fits well, and we don’t have to lean our cues against chairs at the bar anymore.
- This item is portable and can be used on tables, chairs, desks, or any flat surface.
- To use it, you just need to place it on the edge of a table, making it very easy to use.
- It looks modern and nice, and its back is designed to prevent slipping, so it stays stable on the table.
- There are two sizes available: one that holds 2 cues and another that holds 3 cues.
- The material it’s made of is rubber, and it comes in a black color.
- You don’t need to assemble it; it’s ready to use right away.
- The brand of this item is “CROWN ME,” and the style is for holding 3 cues.
- It weighs about 1.1 pounds and is not very heavy.
- The dimensions of the package it comes in are approximately 5.24 x 3.78 x 1.22 inches.
- It doesn’t require any batteries.
- It’s made to last a long time because it’s made from durable rubber.
- The package includes the holder, but the cues themselves are not included.
This object sits nicely on a table or workbench. It’s quite weighty and doesn’t slide around on the table’s surface. Consider getting one for yourself.
#3. BILLIARDS XPRESS Pool Stick Holder
The BILLIARDS XPRESS Pool Stick Holder is a useful accessory for pool players. It’s a portable rack that can hold 3 cue sticks against a table, bar, or chair. Made from solid wood with rounded edges, it helps protect your cue sticks from scratches. The holder comes with a non-slip pad, a cue slicker to keep the cue shaft clean, and a drawstring bag for easy storage and carrying. The dimensions are about 4.5 inches in diameter, 4 inches in width, and 1 inch in height. It has three shelves for holding the cues. The holder is presented in a nice box, making it a great gift for pool players on occasions like Christmas or birthdays. It’s designed to be both attractive and functional, fitting well with your pool table accessories.
- It can hold 3 pool cues against a table, bar, or chair.
- The holder is made of solid wood.
- The wood has rounded edges to protect the cues.
- It also has a non-slip pad to keep it in place.
- The dimensions are about 4.5 inches in diameter, 4 inches wide, and 1 inch high.
- There are 3 sliding shelves for the cues.
- The color of the wood is Multi-Wood.
- It comes with a bonus cue slicker for cleaning the cue stick shaft.
- There’s also a drawstring bag to carry the slicker and holder.
- The product is presented in a nice box, making it a good gift for pool players.
- The holder has a custom cut-out for quarters or pool chalk.
- The holder is portable and useful for billiards players.
- It’s useful for keeping cues handy during tournaments.
- The holder is meant to keep the cues clean and dry for better performance.
This cue holder is quite stylish and stands out from the usual plastic Q claw that many people use. It does its job well by securely holding my cues, which prevents them from falling or getting scratched when they’re leaning against a table or chair. However, it’s important to pick a good spot to place it, so accidental bumps or kicks don’t knock the cues over and damage them. One issue I have is that the holder’s size makes it a bit tricky to fit into the pockets of my cue cases. It’s a tight fit and even interferes with the jump cue pocket. I might end up putting it back in the bag it came with and attaching it to my case instead, even though it’s snug in that bag too. Despite this, the holder works well, looks nice, and is practical. I’ll find a way to make it fit in my case.
#4. Joe Porper Portable Cue Holder - 4 Clip
If you’re looking for something that can hold your pool cues securely and give you more peace of mind than a regular cue holder, you might like the Joe Porper 4 Cue Holder. Instead of using weight to stay in place like other holders, this one attaches to the table using a 2-inch adjustable clamp.
The adjustable clamp is 2 inches long, which means you can attach this cue holder to any flat surface that’s 2 inches thick or less. You just need to tighten it by hand, and you don’t need any special tools. The clamp is made of strong ABS plastic, and the cue holder parts are also plastic but made with a special mix of materials to last a long time. This cue holder is small enough to fit in your cue case too.
- The 4 Cue Clamp is a tool made from strong ABS plastic.
- It’s designed to hold your cues securely and prevent scratches.
- The clamp can be adjusted and fits onto flat surfaces up to 2 inches thick.
- You can use it with cues of various styles.
- It’s compact and can be stored in your cue case.
- Your cues easily slide into a plastic clip without sharp edges.
- The clamp has a big thumb screw, so it’s simple to set up.
- When not in use, you can rotate the clips to fit in your cue case.
- This product is backed by a lifetime guarantee from Joe Porper.
- The dimensions of the clamp are 7 x 4 x 4 inches.
- It comes in a black color and a style called “Cues Slip”.
- It’s produced by Joe Porper’s CI Creative Inventions brand.
- The purpose of this clamp is to hold cues without scratching them.
- It’s easy to install and transport.
- Joe Porper cue racks are all guaranteed for a lifetime.
When you make sure your cues are safely connected to a cue holder that’s locked, it helps you concentrate better on playing the game instead of worrying about your equipment. The Joe Porper cue holder is a really good choice, and it costs less than $20, which is a great deal.
#5. EPOGG Cue Rest Cue Stick Holder
This is a 2-cue pool cue holder made by the brand EPOGG. It’s made of strong silicone material and has a sliding shelf design. There are two shelves to hold pool cues. You might need to put it together when you get it. The special thing about this brand is that it has a heavy base which helps it stay steady on the pool table. This keeps your cues safe so they don’t slide or fall. The cue holder isn’t big, so you can carry it around easily. It fits in most billiards cases and can be used on tables, chairs, or flat surfaces. Using it is simple – you just put it on the table’s edge. No tools are needed, and it’s quick to set up. The holder is made from good silicone that’s friendly to the environment. It won’t harm your cue sticks. The brand logo “EPOGG” is on each holder, and the design is nice and practical. It even has a spot to hold your pool chalk so you don’t lose it. This pool cue holder is sturdy, easy to use, and looks stylish with its unique design.
- Material: Silicone
- Shelf Type: Sliding Shelf
- Number of Shelves: 2
- Assembly Required: Yes
- Brand: EPOGG
- Heavy Duty Base: The EPOGG 2-cue pool cue holder has a heavy base that helps it stay steady on the pool table. This keeps your cues from sliding or falling.
- Portable and Compatible: This cue holder is small and easy to carry. You can put it in your billiards case’s pocket. It works on different surfaces like tables and chairs.
- Easy to Use: Using this cue holder is simple. Just put it on the edge of the table, and you’re done! No tools or complicated steps needed.
- Durable Good Material: The EPOGG cue holder is made from strong foamed silicone. It’s good for the environment and lasts a long time. Your cue stick won’t get damaged.
- Unique Design: Each cue holder has the “EPOGG” logo on it, which makes it special and cool. The bottom doesn’t slip, so it stays put. It even has a spot to hold your pool chalk, so you won’t lose it.
I would recommend getting the Epogg cue rest. If you need more spots or don’t want to spend money on a Q claw, this one will do the job just fine. Most people won’t closely examine your cue holder as long as it works. However, in a direct comparison, the Epogg cue rest is functional and average, while the Q claw offers both functionality and quality.
Conclusion
It’s a good idea to use a cue holder to prevent your pool cue from falling over and getting damaged. A cue holder is a handy tool that you can attach to a table. It keeps your pool cue standing up when you’re not using it, which is really helpful at places like pool halls where there might not be a special stand for your cue. Cue holders aren’t too expensive, so they’re a great choice if you enjoy playing pool often. They’re also important for keeping your pool cues safe from accidents. If you want to buy a portable cue holder, this article can help. It lists the top 5 cue holders available right now, any of which will do a good job of protecting your pool cue when you’re not playing.